Wireless Bluetooth Over-Ear Headphones for Professional Use
Use this product page to shortlist the model, then send quantity, target market, logo and packaging needs for factory MOQ, sampling plan and quote confirmation.
These wireless Bluetooth over-ear headphones use the JL7006F4 platform, Bluetooth 5.4, a 40mm dynamic driver and a single electret-condenser microphone. A specified 40–50ms low-latency mode, 600mAh battery and IPX4 rating support office communication, remote meetings, gaming and general indoor audio use.
Technical Specifications
| Specification | Product detail |
|---|---|
| Chipset / Bluetooth Version | JL7006F4 / 5.4 |
| Bluetooth Profiles | A2DP, AVCTP, AVDTP, AVRCP, HFP, SPP, SMP, ATT, GAP, GATT, RFCOMM, SDP and L2CAP |
| Operating Frequency | 2402–2480MHz |
| Low Latency | 40–50ms |
| Speaker | 40mm dynamic driver |
| Total Harmonic Distortion | ≤5% |
| Ingress Rating | IPX4 |
| Speaker Sensitivity | 112.5dB ± 3dB |
| Frequency Range | 20Hz–20kHz |
| Battery | 600mAh, cell reference 802530 |
| Charging Time | ≤1.5 hours |
| Noise-Control Technology | ENx neural-network algorithm |
| Microphone | One electret-condenser microphone |
| Microphone Sensitivity | −38dB ± 3dB |
| Microphone Frequency Range | 50Hz–10kHz |
| Microphone Operating Voltage | 2.0V |
Over-Ear Wireless Headphones for Calls and Media
The 40mm driver and single microphone suit buyers comparing over ear wireless headphones for calls, media and gaming.
Microphone Noise Control and IPX4
Confirm whether it applies only to microphone call pickup before marketing the feature. IPX4 indicates resistance to splashing under the applicable test conditions; it does not make the headphones waterproof for immersion.
OEM/ODM Manufacturing Inquiry
For wireless over ear headphones with microphone, ChargeKeku can review branding, colour, exterior and packaging requirements.
Sourcing guide for Wireless Bluetooth Over-Ear Headphones for Professional Use
For Wireless Bluetooth Over-Ear Headphones projects, this model brings together battery: 600mAh, cell reference 802530; charging time: ≤1.5 hours; noise-control technology: ENx neural-network algorithm. These details provide a practical starting point for device matching, sample checks and quotation review. Use the same model and specification when comparing quotations for over ear wireless headphones.
Buyer decision points
- Battery: 600mAh, cell reference 802530
- Charging Time: ≤1.5 hours
- Noise-Control Technology: ENx neural-network algorithm
- Chipset / Bluetooth Version: JL7006F4 / 5.4
- RFQ scope: Include wearing format, target phones or computers, music and call use, microphone needs, battery target, controls, accessories, quantity, branding and packaging.
Buyer FAQs for this configuration
Which call and listening noise-control functions are specified for Wireless Bluetooth Over-Ear Headphones for Professional Use?
The microphone or noise-control specification is ENx neural-network algorithm. ENC for microphone pickup and ANC for listener-side noise reduction are different functions. Keep each required function explicit in the RFQ and test it in the intended call or listening environment.
In a sample review, what should buyers verify beyond the Bluetooth version of the Wireless Bluetooth Over-Ear for Professional Use configuration?
The Bluetooth version is JL7006F4 / 5.4. The specified profiles are A2DP, AVCTP, AVDTP, AVRCP, HFP, SPP, SMP, ATT, GAP, GATT, RFCOMM, SDP and L2CAP. Check music streaming, calls, controls, reconnection and target-device interoperability separately, and tie any Bluetooth qualification claim to the exact implementation.
During quotation review, how should the 40–50ms latency claim for the Wireless Bluetooth Over-Ear for Professional Use configuration be tested?
The low latency for Wireless Bluetooth Over-Ear Headphones for Professional Use is 40–50ms. Use the exact phone or computer, operating mode, app and codec or profile intended for the program. State the measurement method because a latency figure without test conditions cannot be transferred to every device.
