Wireless Noise Cancelling Headphones with 45ms Low Latency
Use this product page to shortlist the model, then send quantity, target market, logo and packaging needs for factory MOQ, sampling plan and quote confirmation.
These wireless over ear headphones with microphone use Bluetooth 5.4, a 40mm driver and a specified 45ms low-latency mode. A single microphone, USB-C charging and approximately 10 hours of music playback at 60% volume support office, travel and entertainment applications.
Key Specifications
| Specification | Product detail |
|---|---|
| Chipset / Bluetooth Version | JL7006F4 / 5.4 |
| Bluetooth Profiles | HFP, A2DP and AVRCP |
| Microphones | One |
| Low Latency | 45ms |
| Battery | 400mAh, cell reference 702030 |
| Operating Frequency | 2.4–2.480GHz |
| Wireless Range | Up to 10 metres |
| Speaker | 40mm, 32Ω |
| Speaker Sensitivity | 99dB ± 3dB |
| Frequency Response | 20Hz–20kHz |
| Music Playback | Approximately 10 hours at 60% volume |
| Charging Port | USB-C |
| Charging Input | DC 5V / 380mA |
| Charging Time | Approximately 2 hours |
Low-Latency Bluetooth Audio
The specified 45ms mode is relevant to buyers comparing over ear wireless headphones for video, gaming and communication. Confirm the measurement path, codec, connected device and operating mode on a sample because end-to-end latency can differ from a chipset or link-level figure.
Noise-Control Function to Confirm
The single microphone may support calls, but its exact noise-control behavior requires sample verification.
OEM/ODM Project Support
ChargeKeku can review branding, colour, exterior and packaging requirements for Bluetooth over ear headphones. Share the destination market, order quantity, artwork, required functions and compliance documents so ChargeKeku can provide the correct sample and production specification as a wireless headphones manufacturer.
When to shortlist Wireless Noise Cancelling Headphones with 45ms Low Latency
The Wireless Noise Cancelling Headphones with 45ms Low Latency configuration gives buyers evaluating wireless over ear headphones with microphone a clear specification built around battery: 400mAh, cell reference 702030; charging port: USB-C; charging input: DC 5V / 380mA. Compare these details with the target devices, operating scenario and final order specification. Use the same model and specification when comparing quotations for over ear wireless headphones.
Buyer decision points
- Battery: 400mAh, cell reference 702030
- Charging Port: USB-C
- Charging Input: DC 5V / 380mA
- Charging Time: Approximately 2 hours
- RFQ scope: Include wearing format, target phones or computers, music and call use, microphone needs, battery target, controls, accessories, quantity, branding and packaging.
Buyer FAQs for this configuration
Which call and listening noise-control functions are specified for Wireless Noise Cancelling Headphones with 45ms Low Latency?
The microphone or noise-control specification is One. ENC for microphone pickup and ANC for listener-side noise reduction are different functions. Keep each required function explicit in the RFQ and test it in the intended call or listening environment.
What should buyers verify beyond the Bluetooth version of the Wireless Noise Cancelling with 45ms Low Latency configuration?
The Bluetooth version is JL7006F4 / 5.4. The specified profiles are HFP, A2DP and AVRCP. Check music streaming, calls, controls, reconnection and target-device interoperability separately, and tie any Bluetooth qualification claim to the exact implementation.
In a sample review, how should the 45ms latency claim for the Wireless Noise Cancelling with 45ms Low Latency configuration be tested?
Use the exact phone or computer, operating mode, app and codec or profile intended for the program. State the measurement method because a latency figure without test conditions cannot be transferred to every device.
